Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 28 Next »

This procedure outlines the steps to be taken to close the USPS fiscal year for NWOCA districts.


Cost of Life Insurance over $50,000

  • 1. For any employee that will be retiring at the end of the fiscal year, calculate the cost of life insurance over $50,000. Using the USPSCN/UPDCAL_CUR or USPSCN/UPDCAL_FUT program, the amount should be included as part of their final pay using a pay type of NC1. For an example and in depth discussion of the calculation process, refer to the Reporting Taxable Amount of Life Insurance Premiums.

EMIS Staff Reporting

Please note the EMIS year-end reporting process may or may not be completed, depending on your internal policy.  Please refer to the USPS EMIS Initial Staff and Course Collection Checklist to be certain all areas have been completed throughout the school year.
  • 2  If your EMIS Staff and Course Collection- Final is complete, proceed to step 3.  If your EMIS Staff and Course Collection - Final is not complete, please continue with step 2A.

  • 2A.  Run the USPEMS/USPEMX program to generate a file(s) containing your fiscal year information prior to entering information for the next fiscal year. 

    • Once your USPEMX.SEQ file has been created, send an email to mail_staff_fis@nwoca.org stating so.  
    • You will receive email confirmation from NWOCA fiscal staff confirming your file is ready and you may continue processing.

Month-End Closing

  • 4. Run RETIRE/STRSMONTH.    When the 'Clear STRS MTD accumulators' field is set to Y, the month to date accumulators on the 450/591/691 DEDSCN records are cleared and the new employee flag (previously Y and R) for new employees will be set to "N"on the 450 DEDSCN record.   
    • Under Reporting Options:
      • Single or Double spaced detail = your preference
      • Clear STRS MTD accumulators = the report can be generated the first time with this prompt set to N for verification purposes, then another time with this prompt set to Y.
      • Reporting month and year = current processing month
      • Include employees with FYTD amount only = user preference
  • Run RETIRE/SERSMONTH.   The SERSMONTH is a mandatory report since it also creates month-end reporting for CHKSTS, BENRPT and ABS101.  When SERSMONTH is ran and the Clear SERS MTD accumulators? (Y,N): is set to Y,  it will automatically generate AUDRPT, CHKSTS, BENRPT and ABS101, clear out the month-to-date accumulators on the 400, 590 and 690 records and also set any New Employee flag that was set to "R" on the 400 DEDSCN record to an "N".  The running of SERSMONTH also places the PAYROLLCD reports in the correct directories.
  •  
  • 6. Balance the payroll account (when statement is received from bank).
    • Run CHKSTA/RECONCILE or PAYREC to reconcile checks.
    • Run CHKSTS to generate an outstanding check register.
      • Print Option = P (Paid)
      • Check Type= A (All Checks)
      • Check Selection/Issue Date/Reconciliation Date = all fields should blank
  • 7. Run BENACC (if applicable).
    • Accrual = Use for vacation and/or sick leave.
    • Reset = Use for personal leave.
    • PLTOSI = Use to convert unused personal leave to sick leave.
    • PLTOPAY = Use to convert unused personal leave to pay.

Quarter-End Closing

  • 8. Run QRTRPT selecting the demand option (option N).
  • 9. In the "Totals" section of QRTRPT, the gross and adjusted gross should balance using a manual calculation
Gross
- Annuities
____________
Adjusted Gross Calculated

The Adjusted gross calculated should equal the adjusted gross amount from QRTRPT. This should be true for all adjusted gross figures in the "Totals" section.

  • 10. All deduction checks for the quarter should equal the total deductions showing on QRTRPT. Be sure to verify all electronic payments as well. 
    • CHKSTS can be run to generate a listing of deduction check totals.
      • Sort Option = C
      • Print Option = A
      • Check Type = D, E, G
      • Leave all other selection fields blank
  • 11. The total gross showing on QRTRPT should equal the total of all payroll clearance checks created for the quarter.
    • CHEKPY can be run to generate a listing of all payroll clearance check.
      • Sort options = C
      • Sub-total by vendor = N
      • Print missing check numbers = N
      • Check types to select = P
      • Check statuses to select = leave blank
      • Print vendor from PO or check = P
      • Date Selection = first day in quarter to last day of quarter
      • Check Selection = leave blank
      • Summary or Detail report = S
      • Single or Double space summary report = S
  • 12. It is recommended that you balance the W2REPT quarterly to minimize problems at calendar year-end.
    • Run W2PROC (saying "N" to Create Tape file prompt) to generate W2 reports.
      • Balance the deduction totals (taxes and annuities) on the W2REPT.TXT report with the totals from the DEDRPT.TXT reports from the quarter
      • Balance the gross amounts on the W2REPT.TXT report with PAYRPT.TXT reports for the quarter
    • View the W2ERR.TXT report for errors.  All fatals must be corrected.  Review warnings and informational messages.  Correct if necessary.
    • Complete and balance the W2REPT Reconciliation Worksheet for the quarter following the directions on the Worksheet.
If errors are discovered, check employees that had exception processing during the quarter such as voided checks, error adjustments, or manual changes in USPSCN. The AUDRPT program can be useful in identifying these problems
  • 13. Run PAYDED, to generate a non-zero deduction listing. To do so, set the "Payment Option" to A, leaving the "Pay Cycle" and "Deduction Codes" fields blank. On DEDRPT.TXT, verify that there are no outstanding deduction amounts.
  • 14. The total of all board paid amounts (if tracked on the system) should equal the total of all warrant checks to the vendor or deduction company.
  • 15. Complete and file any required quarter-end submission forms.
  • 16. For city withholdings, take the total gross times the percentage to be sure the tax withheld and submitted are correct.

Mobile employees could cause discrepancies.

  • 17. Run ODJFSRPT setting the "Create a submission file" to N to generate a report only
    • Check all totals carefully for accuracy. If necessary, adjustments can be made using USPSCN/ATDSCN.
  • 18. When all data is correct, run ODJFSRPT again, this time indicating that you want to create a tape file for submission.
  • 19. Contact NWOCA via email (mail_staff_fis@nwoca.org) and inform them that you have created the ODJFS tape file.

STRS Advance Processing

Employees flagged as full-time must have at least 120 service days to be granted a full year of service credit toward retirement. Employees flagged as part-time will be given credit according to STRS rules outlined in the STRS Employer's Manual. If you are in doubt about an employee's part-time or full-time status, contact STRS and obtain a ruling.
  • 20, Run the STRSAD program and select the projection only (option 1). This option can be run as many times as needed. The program produces three reports. The STRSAD.TXT report lists all advanced jobs for the district. The STRSAD.RPT report is the complete fiscal year-end report for all STRS employees. The NONADV.TXT report lists STRS employees whose jobs will not be advanced. Verify the data on the reports. On the STRSAD.RPT report, check each employee's service credit and FYTD totals. At the bottom of this report, there is an amount labeled Total Taxed + Non-taxed. The amount shown should equal the amount deposited with STRS during the fiscal year plus the amount of accrued contributions on summer pays.

  • 21. Once the data has been verified for the advance, run the STRSAD program again, this time selecting Option 2. This option creates the file that will be submitted electronically to STRS and sets the STRS period closing date field in the USPSDAT/USPCON to 06/YYYY.

♦  Option 2 also flags eligible jobs as in advance mode until the last payment in the contract has been paid. At that time, the advance flag is turned off and the job is no longer considered in advance mode. Print and file the final copies of the STRSAD.TXT and STRSAD.RPT reports.

Due to the importance of your STRSAD reports, please do not proceed with the next step until notified by NWOCA with an email.


  • 23. Run ANNSTRSSND to submit STRS annual reporting information electronically to STRS.

Quarter-End Closing Completion

  • 24. Run SURCHG if desired. This program is designed to assist you with verifying the SERS surcharge calculations and GAAP reporting. See the SURCHG chapter of the USPS Reference Manual for more information.
  • 25. Run CLRATD after the year-end EMIS staff data is complete and the quarter end reports are printed, but before long term illness days are input for the new fiscal year. This program will clear the long term illness field on USPSCN/BIOSCN.

Fiscal Year-End Closing

  • 26.  Run @PAY:USPS_FISCAL_COPY or from the MENU>USPSFISCAL to make a copy of your payroll files for the fiscal year.
Due to the importance of securing a copy of the payroll files once the fiscal copy procedure is complete, you will receive an automated email message indicating you are NOT to proceed with the next step in this procedure until notified by NWOCA.The NWOCA Fiscal Staff will insure the copy procedure ran successfully and will then respond to you via email with instructions to continue with the procedure. Please wait until this message is received from NWOCA before proceeding. We will attempt to contact you as soon as possible.
  • 27. Run USPAUDIT to create a USPS submission file for Auditors.
  • 28. Run AUDRPT choosing the O-Official option. Check the payroll CD to verify that the Official AUDRPT copied out properly.
  • 29. Run QRTRPT again, this time clearing all data for the quarter and the fiscal year (option F). In addition, when this option is chosen a prompt will ask if you would like to clear the EMIS specific fields in JOBSCN.
  • 30. To insure the data cleared correctly, run the QRTRPT program again (demand option N) and verify that the fiscal year to date totals on the report are zero.


Post Fiscal Year-End Closing


Restrictions during the advance:

  • Modifications cannot be made to certain fields on jobs in the advance mode.
  • Certain Pay Types can be processed on advance jobs. See the STRS chapter of the USPS User Guide for details


  • 31. STRS follow-up on the Advance after all summer pays:
    • Run USPSDAT/USPCON. Verify the advance amount now shows as zero dollars.
      • If not, run CHKSTRS, sorting it the same as STRSAD.TXT. Compare totals for each employee to those on the STRSAD.TXT. Any employee showing a differing amount should be researched.
      • Any difference should be reported to STRS as a prior fiscal year correction if necessary.
    • Contact NWOCA to have any remaining STRS advance amounts removed from USPSDAT/USPCON.


You have completed the USPS Fiscal Year End Closing procedures.

  • No labels